Here you can find detailed specifications of the power supplies (PSU’s) for the different Elektron devices.


MODEL:SAMPLES

Current Elektron power supply: PSU-4

The power supply you want to use must meet the following specifications:

SPECIFICATIONS

  • Voltage: 5 V DC

  • Minimum Current: 4 A

  • Barrel Connector Size: 3.5 mm outer diameter, 1.35 mm inner diameter

  • Polarity: Positive center


ANALOG RYTM MKI/MKII, ANALOG FOUR MKI/MKII, OCTATRACK MKII, ANALOG DRIVE, ANALOG HEAT MKI/MKII, DIGITAKT, DIGITONE, DIGITONE KEYS

Current Elektron power supply: PSU-3b. Analog Rytm MKI and Analog Four MKI were originally shipped with PSU-3. All these devices (except for Analog Drive) works with PSU-3.

The power supply you want to use must meet the following specifications:

SPECIFICATIONS

  • Voltage: 12 V DC

  • Minimum Current: 2 A

  • Barrel Connector Size: 5.5 mm outer diameter, 2.5 mm inner diameter

  • Polarity: Positive center


MONOMACHINE MKII, MACHINEDRUM MKII, OCTATRACK MKI

Current Elektron power supply: PSU-2b. These devices were originally shipped with PSU-2.

The power supply you want to use must meet the following specifications:

SPECIFICATIONS

  • Voltage: 6 V DC

  • Minimum Current: 3 A

  • Barrel Connector Size: 5.5 mm outer diameter, 2.5 mm inner diameter, 6 mm length

  • Polarity: Positive center


MONOMACHINE MKI, MACHINEDRUM MKI

Original (and now obsolete) Elektron power supply: PSU-1 (two versions depending on voltage standard)

Please note that the power supply output must be AC!

The power supply you want to use must meet the following specifications:

SPECIFICATIONS

  • Voltage: 6 V AC, 50/60Hz

  • Minimum Current: 2.5 A

  • Barrel Connector Size: 5.5 mm outer diameter, 2.5 mm inner diameter, 6 mm length

  • Polarity: Positive center


SIDSTATION

The power supply you use must meet the following specifications:

SPECIFICATIONS

  • Voltage: 6 V DC

  • Minimum Current: 400 mA

  • Barrel Connector Size: 5.5 mm outer diameter, 2.1 mm inner diameter

  • Polarity: Positive center


OVERHUB

In most cases, you don't need to use a power supply together with the Overhub. However, if you want to use it together with a non-self powered device (for example, an external hard drive), you must connect a power supply to the Overhub.

The power supply you use must meet the following specifications:

SPECIFICATIONS

  • Voltage: 5 V DC

  • Minimum Current: 4 A

  • Barrel Connector Size: 3.5 mm outer diameter, 1.35 mm inner diameter, 6 mm length

  • Polarity: Positive center